在使用升降機之前,需要對升降機的油路進行檢查.今天,為大家介紹一下升降機的油路檢查事項:
首先,對升降機的油路進行檢查,看看是否存在漏油的現象;也就是說一定要檢查一下升降機本身是否存在被破壞的地方,這是最主要的.
First of all, to inspect the elevator oil, have a look whether there is leakage phenomenon; that is to say we must check the elevator itself whether there is destroyed the place, this is most important.
其次,在檢查完畢發現沒有表象的破壞之后,就需要對整個升降機的電路進行檢查了,再接上了電路之后需要檢查一下各項配件是否都可以正常的進行工作,然后再進行初步的升降工作實驗,從這項工作來看設備本身是否能夠正常的工作.
Secondly, after checked and found no appearance damage, requires the circuit on the whole elevator inspection, then connected to the circuit needs are review the parts can be normal work, then the lifting work preliminary results from this work, equipment to see itself whether can normal work.
最后,筆者認為,對升降機進行檢查確保沒有任何瑕疵后,就可以通過專業人員來進行設操作,以便能夠在以后的使用中盡快熟練的進行操作,并保證設備故障的最小化.
Finally, elevator manufacturers think, to inspect the elevator to ensure no flaws, can through professional personnel to set the operation, in order to be able to operate as soon as possible to good use in the future, and minimizing the equipment fault.