升降貨梯http://www.jntr168.com/是軸承最多的升降設備，它的上升和下降也是依靠這些軸承的運動來完成的，頻繁的使用會加大軸承間的磨損，也會讓設備老化，這個時候就需要更換軸承了。那么應該如何更換軸承呢？

首先要使用行車或者吊葫蘆把平臺吊裝起來，再進行拆卸，并把平臺移動到其它的地方。所更換到的軸承一定要與原裝的相同，否則就容易安裝不上。如果需要更換的軸承超過一半，則需要全部進行更換，如果發現一個軸承的磨損達到90%則必須進行更換。更換完成后，要立刻對設備進行檢測和校驗。發現不平行要進行調整。
The first to use the road or chain hoist lifting up the platform, and then demolished, and the platform is moved to other places. The replacement of the bearings must be the same as with the original, otherwise it is not easy to install on. If you need to replace more than half of the bearing, you need to replace all, if you find a bearing wear reaches 90% it must be replaced. After replacing the equipment to be immediately detected and verified. Find no parallel to be adjusted.

如果新更換的軸承磨損過快，要與廠家聯系查找問題，找到磨損過大的原因。更換的時候全選擇正規廠家的耐磨套，不要買一些較差的次品，不僅不能解決問題，還能造成更嚴重的傷害。更換完成要對設備進行全面的保養，并空載運行幾次進行磨合再進行使用。　
If the new replacement excessive bearing wear, to contact the manufacturer to find the problem, find the cause of excessive wear. When replacing the entire selection of formal wear sleeve manufacturers, do not buy some of the less defective, not only can not solve the problem, but also cause more serious injuries. To complete the replacement of the equipment to conduct a comprehensive maintenance and running-load operation several times before use.

升降貨梯：http://www.jntr168.com/