現在節能是整個社會都在追求的一個目標，對升降貨梯來說尤為重要，升降貨梯的節能降耗措施是從多方面來進行的。

1、如果要想減少升降貨梯http://www.jntr168.com/的能耗，先從減小升降貨梯系統的慣性和磨擦阻力開始，合理運用平衡重和對重，可以將升降貨梯驅動系統換成永磁同步無齒輪曳引機，無需額外提供磁電流，同時永磁同步電機的轉子中沒有電流通過，轉子也就不會有損耗，在加上效率低、高能耗的蝸輪蝸桿傳動，進一步提高節能效果。
If you want to reduce the energy consumption of cargo lifter, starting with cargo lift system to reduce the inertia and friction resistance began, the rational use of counterweights and heavy cargo lifter drive system can be replaced by a permanent magnet synchronous gearless traction machine, without provide an additional magnetic current, while the rotor permanent magnet synchronous motor is no current flow through the rotor there would be no loss, plus the low efficiency, high energy consumption worm gear, to further improve energy efficiency.

2、升降貨梯軟件控制也是一種有效可行的方式，在升降貨梯中建立實時控制模式，盡量以較少的運行次數來運載更多的貨物，利用率在提升的同時升降貨梯的停站次數也會減到最低。
Cargo lifter software control is an effective and feasible way to build real-time control in cargo lifter mode, try to run with less frequency to carry more cargo, enhance utilization while cargo lifter will reduce the number of stops to a minimum.

3、升降貨梯http://www.jntr168.com/運行過程中產生的能耗也是很大的，因此這方面問題也需要進行控制。當升降貨梯空載上行、滿載下行時，電機是處于發電狀態的，這樣就可以充分利用再生能量，從而提高節能效果。
Cargo lifter energy generated during operation is great, so it issues also need to be controlled. When cargo lifter load up, loaded downstream, the motor is in power state, so you can take full advantage of renewable energy, thereby

improving energy efficiency.